This model is for your cars that are still in the design stage. Where you need to check the clearance and double-check the spacing. Measurements are 99% correct. 1% is like the missing Tig welding design. I just did not copy that one to make the model lighter and easier to work with.If you want a 3d printable design, you can contact me here or email me at lancerromero28@gmail.com
Info:Improved Racing's Motorsport Heat Exchanger (MHX) series oil coolers are the result of several years of development and testing to create a highly efficient oil cooler. These coolers were perfected through extensive testing on our in-house heat exchanger test system and wind tunnel.
The MHX-520 oil cooler is a dual-pass oil cooler that matches heat rejection rates to larger, heavier stacked-plate coolers made by brands such as Setrab, Mocal, and Earl's. Compared to a typical 34-row stacked plate cooler, this cooler is 21% smaller overall and 19% lighter, yet holds 39% more fluid volume. The core is 23% thinner and has a lower row and fin density, allowing more air to flow through the cooler to other heat exchangers (such as a radiator) behind it.
A major design focus was to minimize welds and brazings to make these coolers stronger, lighter, and less prone to leaks. All four end caps are single-piece CNC-machined billet aluminum. The rows consist of laser-welded, thin-gauge aluminum tubes stuffed with turbulators to maximize heat transfer while minimizing weight. The dual-pass design also maximizes heat transfer efficiency.
There are four M8x1.25 mm mounting holes, one on each corner of the cooler. Improved Racing has designed lightweight aluminum brackets (sold separately) to make mounting your cooler as easy as possible. The brackets feature integrated rubber isolators that protect the cooler from excessive vibration and extend the life of the cooler.
The MHX 500-series coolers feature -10AN female O-ring boss ports on the same side of the end tank for convenient line routing. Optional fittings are available in -6AN, -8AN, -10AN, and -12AN JIC male flare threads.
All Improved Racing oil coolers are pressure tested to 175 PSI to ensure no leaks and are rated for continuous operation at 150 PSI. Our coolers are made in the USA and backed by our Lifetime Warranty.
-link for the actual item : https://www.improvedracing.com/mhx-520-high-efficiency-oil-cooler.html
