This compact 3D printed table lamp features a clean pleated shade set on top of a geometric, faceted base with a rough tactile texture. The vertical folds of the shade diffuse light evenly while creating a subtle play of light and shadow. It is a straightforward, functional design focused on neat proportions and simple geometry, inspired by modern Japandi and Wabi-Sabi styles.

PRINTING & ASSEMBLY• Print-ready and tested.• Support-free design.• Fits standard E26/E27 sockets (hole diameter 41 mm; can be used as a replacement shade for most home table or pendant lamps) and standard E14 socket with adapter (included in files; hole diameter: 28 mm).• Supports printing with PLA, PETG and other standard filaments.• Assembles easily without glue or screws.

MODULAR SYSTEMMix and match filament colors, or pair this model from the UNI series with other interchangeable bases and shades from the UNI or AIR series available in [my profile] (https://www.cgtrader.com/designers/znovoo-design). AIR shades fit AIR bases directly, and they also fit UNI bases or most home lamps using the included adapter (UNI shades do not fit AIR bases). Follow my page for regular modular design updates.

DIMENSIONS• Shade: height: 160 mm (6.3 in), width: 170 mm (6.7 in)• Base: height: 120 mm (4.7 in), width: 94 mm (3.7 in)

PRINT TIMEDepends on printer and print settings. For standard settings on a Bambu Lab A1:• Shade: ~2h 40m• Shade Topper: ~50m• Base: ~4h

WEIGHTDepends on printing settings. Using the recommended settings: shade ~90 g, shade topper ~20g, base ~120 g.

WHAT'S INCLUDEDFiles for Lamp Shade and Base:• STL — 4 files (Shade + Shade Topper + Base + E14 adapter), print-ready (tested and verified on Ender 3 S1)• OBJ — full lamp assembly (Shade + Base combined), for import into Blender, Cinema 4D, or any 3D software• 3MF — 4 files (Shade + Shade Topper + Base + E14 adapter), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print).

Use LED bulb ONLY.

A lamp cord with E26/E27 or E14 socket is required (not included). Search plug in lamp cord kit E26 or plug in lamp cord kit E14 on Amazon or your local hardware/lighting store. •• For personal use ONLY. Resale of files or printed objects is not permitted.••

Any questions? Feel free to ask! Visit my profile & follow for more designs — new models added regularly!

PRINT SETTINGS (recommended): • Shade: VASE MODE (spiralize outer contour), layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 20. • Base and Shade Topper: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin for Base. • No supports needed. • All STL, 3MF files are already oriented properly (base should be printed upside-down).