This geometric table lamp features a cylindrical shade fully covered in a raised brick-like relief pattern — a repeating grid of embossed rectangular blocks that cast interesting shadows when lit. The base is low poly with flat angular facets instead of a smooth surface, giving it a geometric sculptural shape. It is designed to be printed with Fuzzy Skin to achieve a tactile, stone-like texture.Easy and fast prints in PLA, no supports needed, the shade is fully optimized for vase mode. A good option if you want a textured geometric lamp that actually looks detailed without a long print time.Shade and base assemble without glue.

DIMENSIONS• Shade: height: 180 mm (7 in), width: 178 mm (7 in)• Base: height: 120 mm (4.7 in), width: 94 mm (3.7 in)

WEIGHT Depends on printing settings. Using the recommended settings: shade ~110 g, base ~120 g.

FEATURES• Print-ready and tested.• Fits standard E26/E27 socket. • Mix and match filament colors for the shade and base for a personalized look.• Designed as a standard size and can be used as a replacement shade for most home table or pendant lamps (please check the measurements to ensure it fits your specific lamp).• All lampshades and bases are part of my modular system (they are compatible with each other shades and bases from my profile and can be combined in any configuration).

WHAT'S INCLUDED:Files for Lamp Shade and Base:• STL — 2 files (Shade + Base), print-ready (tested and verified on Ender 3 SE)• OBJ + MTL — full lamp assembly (shade + base combined), for import into Blender, Cinema 4D, or any 3D software• 3MF — 2 files (Shade + Base), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print).

Use LED bulb ONLY.A lamp cord with E26/E27 socket is required (not included) — available at most hardware or lighting stores (for example:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW )

•• For personal use ONLY. Resale of files or printed objects is not permitted.••

PRINT TIMEDepends on printer and print settings. For standard settings on a Bambu Lab A1: • Shade: ~2h 40m • Base: ~4h

PRINT SETTINGS (recommended):• Shade: VASE MODE, layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 7.• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin.• No supports needed.• All STL, 3MF files are already oriented properly (base should be printed upside-down).