A sculptural modern table lamp inspired by Scandinavian design. The shade takes the form of an organic balloon, with fine diagonal spiral ribs that wrap around the surface. The cylindrical base is covered with a dot texture. Easy and fast prints in PLA, no supports needed, the shade is fully optimized for vase mode. Shade and base assemble without glue.

DIMENSIONS Shade: height: 170 mm (7.6 inch), width: 185 mm (7.3 inch) Base: height: 100 mm (3.9 inch), width: 80 mm (3.1 inch)

PRINT TIME Depends on printing settings Shade: ~3h 20m Base ~3h 20m

WEIGHT Depends on printing settings. Using the recommended settings: shade ~90 g, base ~110 g.

FEATURES • Print-ready and tested. • Fits standard E26/E27 socket. • Mix and match filament colors forthe shade and base for a personalized look. • Designed as a standard size and can be used as a replacement shade for most home table or pendant lamps (please check the measurements to ensure it fits your specific lamp). • All lampshades and bases are part of my modular system (they are compatible with each other shades and bases from my profile and can be combined in any configuration).

PRINT SETTINGS (recommended): • Shade: VASE MODE, layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0,bottom layers 7. • Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you canuse from 5% but the base will feel lighter and less solid), top layers 5,bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin. • No supports needed. • All STL, 3MF files are already orientedproperly (base should be printed upside-down).

Use LED bulb ONLY. A lamp cord with E26/E27 socket is required (not included) — available at most hardware or lighting stores (for examples:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW )

For personal use ONLY. Resale of files or printed objects is not permitted.