3D model description:

Base for miniature wargames in different sizes

Standard infantry: 25mm

Armored infantry: 32mm

Heavy Infantry/Exoskeletons: 40mm

Monsters / Large Characters: 50 mm

3D printing settings:

Layer Height: 0,05 mmBottom Layer Count: 8Exposure Time: 2,5 sBottom Exposure Time: 80 sTransition Layer Count: 5 TransitionType: LinearWaiting Mode During Printing: Resting TimeRest Time Before Lift: 0 sRest Time After Lift: 0 sRest Time After Retract: 0,5 s

Or

Layer height: 0.12 mmFirst layer height: 0.2 mmLine width default; 0.42 mmFirst layer: 0.5 mmOuter wall: 0.42 mmSeam position: BackStaggered iner seams: YesSeam gap: 10 %Wall loops: 2Top surface pattern: Monotonic lineTop shell layers; 5Bottom shell layers: 3Sparse Infill density: 20 %Sparse infill pattern: GridSparse infill direction: 45°Solid infill direction: 45°First layer speed: 60 mm/sFirst layer infill speed: 60 mm/sOuter wall speed: 200 mm/sInner wall speed: 300 mm/sSlow down for overhangs: YesTravel speed: 500 mm/sSupport: YesType: Tree - OrganicRaft: NoSkirt: NoBrim: No