3D MODEL DESCRIPTIONHello friend, today on my profile, I wanted to bring a very nice stand controller, to pull next to your ps5.

The stand controller is modular, you can print the white walls, the central piece of black, and finally the playstation logo you can print blue, or you can print it as you like.

If you don’t find the logo you like in my profile, contact me in the messages section, I will be happy to make it for you, and publish it, here on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good print my friends for anything, contact me via messages.

3D PRINTING SETTINGSLayer 0.15 / 0.20Temp 205° / 50° PLA - 230° / 65° PETGInfill 10%Top and Bottom Layer 4Perimeter Layer 3Speed 50/60 mm/s