Title:

Pipe Pot Lid Lifter STL – Chimney Style Lid Spacer for 3D Printing

E-mail for collaboration: koznov.sergey@gmail.com

Give a practical kitchen concept an industrial character with this pipe-shaped pot lid spacer. Its tall cylindrical body, curved ends, and circular upper rim create the appearance of a miniature chimney positioned beside a cooking pot.

The shaped lower cutout is intended to sit against a compatible pot rim and provide spacing beneath the lid. The long upright section extends above the cookware, giving the accessory a distinctive silhouette inspired by exposed pipes and traditional stove chimneys.

The model combines smooth cylindrical surfaces with rounded transitions and a pronounced upper rim. These features make it suitable for product prototypes, kitchen display props, and custom finishing projects. Gray, black, copper-colored, or metallic-effect finishes can emphasize its industrial appearance.

Confirm the lower cutout dimensions, cookware rim thickness, and lid clearance before printing at your chosen scale. The reference images illustrate the intended cooking concept; safe operating temperatures, steam routing, and food-contact suitability have not been established. Plastic prints should be treated as display pieces or cold fit prototypes unless the finished part has been separately validated for cooking use.

Features:

• Pipe-Inspired Design: A miniature chimney silhouette gives the model a distinctive industrial appearance.
• Pot Lid Spacer Concept: Intended to create separation between a compatible pot rim and lid.
• Shaped Lower Cutout: An open recess provides the intended contact area for placement against the cookware rim.
• Tall Cylindrical Body: Extends the design above the lid and emphasizes its chimney-like proportions.
• Curved Upper End: A rounded bend transitions from the vertical body to the circular upper face.
• Raised Circular Rim: Adds definition around the upper end of the model.
• Rounded Lower Transition: Connects the straight body to the shaped rim-contact section.
• Smooth Exterior Geometry: Suitable for sanding, painting, and decorative surface finishes.
• Customizable Appearance: Print in different colors or apply a metallic-effect finish for display.
• Fit Evaluation: Use a cold prototype to assess placement, lid clearance, and stability on your specific cookware.
• Scalable Model: Adjust dimensions in your slicer while checking how scaling changes the lower recess and overall proportions.

Included Files:

• .STL: Pipe-style pot lid spacer model for 3D printing.

Recommended 3D Print Settings (FDM):

• Print Orientation: Evaluate a horizontal or slightly angled orientation with the long body positioned along the build plate.
• Layer Height: 0.16–0.20 mm as a starting point; finer layers can improve the appearance of curved surfaces.
• Perimeters / Walls: 3–4 walls for a display print or cold fit prototype.
• Infill: 20–30%, adjusted according to the actual internal geometry and intended prototype use.
• Supports: Inspect the curved ends, lower recess, and upper rim in the slicer. Supports may be needed beneath these areas.
• Support Access: Choose support placement that allows removal without damaging the lower contact surfaces.
• Material: PLA, Matte PLA, or PETG for display pieces and cold fit checks. These settings do not establish suitability for cooking.
• Bed Adhesion: Consider a brim if the selected orientation provides limited contact with the build plate.
• Fit Check: Measure the pot rim and compare it with the lower cutout before printing.
• Scaling: Recheck rim clearance, lid spacing, and wall thickness after any size adjustment.
• Finishing: Remove support marks and smooth the contact edges before testing on unheated cookware.
• Slicer Preview: Inspect thin edges, openings, and curved sections for complete toolpaths before starting the print.

These settings are suggested starting points for display prints and cold prototypes, not verified print specifications or a heat rating.

Multi-Purpose Use:

• Kitchen Product Prototype: Explore the placement and proportions of a pipe-style lid spacer.
• Cold Cookware Fit Model: Check compatibility with a particular pot and lid without heat exposure.
• Industrial Kitchen Display: Add a miniature chimney detail to a staged cookware arrangement.
• Photography Prop: Use the model in product presentations and kitchen-themed compositions.
• Custom Finishing Project: Experiment with metallic colors, painted details, or weathered industrial finishes.

Note: This is a digital STL model for 3D printing. No physical item is included. Cookware, lids, and other props shown in the images are not included. Compatibility and stability depend on the model dimensions, cookware geometry, print material, and settings. Use with hot cookware or steam requires separate validation of the finished part.

Tags:

pot lid lifter, pot lid spacer, lid spacer, pot lid holder, chimney lid lifter, pipe lid lifter, steam vent concept, kitchen accessory, cookware accessory, cooking accessory, pipe design, chimney design, industrial design, kitchen gadget, product prototype, kitchen prop, cookware prototype, 3d printable, 3d printing, stl