Drink organizer.

Have always cold drinks, thanks to this dispenser, fill the dispenser up to 9 units.(33 cl Diam 66 x 115 lenght)The bottom drink is always the coldest.only 130 wide x 170 high x 330 deep, designed for fridge.

Full print with 3x4x4 walls/top/bottom and aprox 20% infil came to about 140g+140g in weight.

Model 2 pieces for bed 300 x 300 mm rotation 45 degrees. (2 models full)Model 2 + 2 pieces for 220x200 beds (4 models little)

Added slim model, smaller dimensions and only 75 grams (always bed 300x300)I have also added the CAD files

You do not need extra parts, only fit tightly, in case of loose parts you can put a little glue on the lace

For other dimensions:The design is prepared for a can of Diameter 66 x 115 in height. If you have other dimensions it is very easy to adapt it by scale. For example, a can with a diameter of 55/66 = 0.878 of scale in X and Y axis, if it has a length of 146/115 = 1.27 of scale in Z.So you can make the design for any can, I have added a photo to understand.

Print SettingsPrinter:Two trees Sapphire Plus

Rafts:No

Supports:No

Resolution:200

Infill:30

Filament brand:Pla Fervi Esencial, Petg

Filament material:PLA-PETG