Headphone made from character Dynamo, from Deadlock, using his head.All separated pieces for easier printing and assembly.Assembly guide included, but its pretty easy to glue.You can glue head on base, or not, so its empty to fill inside with anything you want to keep.

Full size is: 193x157x157And here are the sizes of each piece, so you can check on your printer:

• Head: 155x135x135mm
• Bottom: 157x157x39mm
• Back: 55x54x23mm
• Ears: 44x44x18mm
• Glass: 99x39x4,5mm

Feel free to resize as you prefer (be aware to resize all the pieces proportionally)

Most pieces won't need support, but bottom may require small ones on its baseAnd depending on your printer, the Head part may require a few supports on its holes.

IMPORTANT:I only do the 3d design work, be aware of licensing if you think of selling physical products of valve/deadlock brands.

Didn't test print it, but if I did, I would use this Cura settings on my Ender 3 Pro, printing in PLA: (I also recommend resin for high amount of details)-Dynamic Quality: 0.20mm (due to size, no need to be lower) -Supports: Only on bottom-Printing Temperature: 200 (230 for V-Silk) -Build Plate Temperature: 70 -Speed: 35 mm/s -Build Plate Adhesion Type: Skirt or none.