Racing Seat Belt with 5 Point Harness 3D print model

Seat belts for racing, drifting, competition cars, etc. This model is the 5 Point Harness.The design is proprietary, not downloaded from the internet and inspired by the most famous brands on the market.The file set consists of the central latch, belt buckle, belt body adjustments and belt chassis clips. You just need to add the ribbon that will represent the seat belt itselft.The files are in 1:24 scale.

For other scales you can use the scale table below:

1/64 - 37.5% (Not tested)1/32 - 75% (Not tested)1/25 - 96% (Not tested)1/24 - 100%1/18 - 133.3333%1/12 - 200% (Not tested)1/10 - 240% (Not tested)1/8 - 300% (Not tested)

3D printing settings

You can print with a layer height of 40μm, if you want a higher level, with 30μm you will have a better result. Layers smaller than this will make no difference.Other printing details depend on the resin you use and the printer, but do not require special care.