Detailing set for 1/10 or 1/12 scale miniatures. It can be used in other scales, but the measurements must be evaluated when assembling.The kit consists of screws and rivets of the following models and measurements (measurements are from the head)Allen - 0.6mmAllen - 0.7mmAllen - 0.8mmAllen - 0.9mmAllen - 1.0mmSlotted screw - 0.9mmSlotted screw - 1.2mmHex screw - 0.7mmHex screw - 0.8mmHex screw - 0.9mmHex screw - 1.0mmRivet - 0.7mmRivet - 1.2mm

3D printing settings

You can print with a layer height of 40μm, if you want a higher level, with 30μm you will have a better result. Layers smaller than this will make no difference.Other printing details depend on the resin you use and the printer, but do not require special care.