Printable Pennsylvania Railroad X29 Boxcar 1924 in H0 Scale
- UPDATED: 7-rung ladders corrected to 6-rung as original (not shown on screenshots)
- UPDATED: added version with samller rivets for FDM printers with 0.2mm nozzle and less or SLA printers
- Model is optimized for FDM printer with 0.4mm nozzle, bus smaller nozzle or SLA printer also can be used.
- The model is divided into parts for ease of printing
- A lot of parts are symmetrical, it doesn’t matter if it’s left or right
- Model have H0 (1:87) scale, printed model dimensions 155x34x53 mm. (without couplers)
- Doors of assebled model are opening
- Print quality and accuracy depends on the specifications and settings of your printer.
- PLEASE NOTE! Whellsets and rails on screenshots are for demonstaration only! Not included!
To finish assembly you will need
- 2 pcs. Kadee type couplers
- 4 pcs. 33" plastic or metal wheelsets
- 2 pcs. M2x2 screw for couplers
- 2 pcs. M2x4 screw for bogies
- Piece of metal wire mo make brake whell axis
- Optional more wires for underbody brake rods and hoses
- Optional factory made bogies for better wiev and rolling
