Full scale 1:1 model for 3D printing of the Treadwell droid. Where possible I've used known measurements to make this as accurate as I can, but otherwise modelled from blu-ray stills and behind the scenes.

This includes presupported parts and original parts at 1:1 scale. You will need to scale these down for your printer. The wheels are designed in such a way to be printed directly on the bed. The presupported parts (intended for a modern resin printer) are intended to be printed at 1:10 scale but you could likely scale to 1:6 or down to 1:8 with a high res 8k mini printer.
I'm told printing 1:6 scale on a 4k printer works well.

Common scales you may wish to use in your slicer. 1/6 scale = 16.6667% 1/8 scale = 12.5% 1/12 scale = 8.3333%

I successfully printed these on my Phrozen 8k Aqua resin on Phrozen Mighty 8k

Layer Thickness: 30um Bottom Exposure: 28 sec Exposure Time: 1.9 sec Lift Distance: 8mm

UPDATED------------------ 1st May 2023-----------------------

I've included a version of the neck and arms separated from each other which may be easier to manage.

Supported versions too.