These parts should allow you to complete your own Jedi Training Remote Droid with the original Plastruct hemispheres (product code VHH-600),as originally used in 1977) or using the two completed halves supplied if you have a printer big enough.

The STLs are accurately modelled from difficult to find kit parts. It was not cheap to source these parts and took a long time and many test prints to insure accuracy.

Included is supported versions too and two guide pieces to aid in placement (see pictures) on the Plastruct hemispheres.

Please note the Plastruct hemispheres are NOT exactly 6" diameter or 150mm. They're closer to 146mm (5.74 inches) and the parts in this kit are designed to work with this size.

Printing Notes:

Intended for high resolution resin printing, not FDM.

I successfuly printed these using Phrozen Aqua 4k grey resin on my Phrozen Sonic Mighty 8k printer.Word of warning, I found that the Sonic Mighty 8k prints very slightly larger than the CAD models. I had to scale parts down to 99% to match the modelled size.