Star Wars A-Wing fighter 1/16th scale.model consists of 85 stl files scaled to 1/16th scale, for 1/35th scale simply scale to 50% in slicer program. this model has been created using a creality cr 10 300 x 300 x 300 build plat and a anycubic photon s resin printer, all parts can be printed on a FDM printer.the cockpit canopy was made using a 3d printed plug then vac formed with 1mm petg sheet on a home made vac forming box which is really simple to make( plenty of vids on youtube).the cockpit zip file contains stl files for resin canopy print in clear resin or simply a printed canopy , vac form plug and canopy frame stl files for vac formed canopy.there are options to illuminate the instruments( i printed the instrument console in clear resin then painted it up with a single led inside again how you go about lighting it up if you choose to do so is up to you but i can help if needed.model has the ability to be displayed either in flight mode with a 10mm rod( hole to accept the rod is hidden under a panel on the underside, or in landing mode with a full landing gear and gear doors.