Praetor armor - FKYAH pattern - Pre-supported

Praetor armor - FKYAH pattern - Pre-supported 3D print model

Description

Those at headquarters realized that the Praetors were not going to be enough for the... Scientific expeditions... This is how the F.K.Y.A.H. pattern was born and developed.... Superior to the Praetors in every way. Capable of... Collecting samples and data... With much more ruthlessness and efficiency...

The pressuported size fits well on a 50mm. base but it could go well on a 60mm. too

If you have any thought about the model or any idea you want me to try for future models, feel free to send a message or leave a comment to let me know!

Printing parameters:

This models are intended for resin printers and tested with an Elegoo Mars and an Anycubic photon s.

The support are made for 0,03mm layers and the test prints you see in the image were made with this parameters as well as 6-9 seconds of exposure per layer depending on the resin.

I highly recommend to remove the supports after cleaning but before curing for better results. For the parts where the supports won't come out easy or are attached to delicate parts I also highly recommend to use clippers.

Item rating
0 0
Praetor armor - FKYAH pattern - Pre-supported
$3.90
 
Editorial No Ai License 
Praetor armor - FKYAH pattern - Pre-supported
$3.90
 
Editorial No Ai License 
Response - % in - h

3D Model formats

Format limitations
  • Stereolithography (.stl)279 MB

3D Model details

  • Publish date2022-09-11
  • Model ID#3983942
  • Ready for 3D Printing
Help
Chat