This model is huge. No really it's big.

As such It comes in a big chunk for you to split into chunks to suit YOUR printer size.

You may also feel printing it at a different scale is a better compromise between realism and usability.Just please understand this is not gonna be a one-click print. It is aimed at people who understand how to print a huge model.

The STL files are at currently scaled to 1/3rd of 28mm/32mm scale.

REPEAT - these files are scaled to 1/3rd the scale for Legion/etc...

If you intend on printing for Legion or any 28mm Tabletop game you need to:

1) Scale up x3 (or your desired scale)You can do this in your slicer (cura/chitubox/lychee/etc) or 3D modelling software by setting the scale to 300%

2) Split for your printerDue to the size I have left it unsplit. I could have split it into chunks, but: a) Printer sizes vary, and you'd really want it to use as much of your print plate as possible. b) Cos of the size of this it is pointless targeting something like a mars/photon as a default. I'd recommend using something bigger. c) If you're gonna print something well over a meter long you're gonna want to tailor/optimize the chunks to your setup and your way of working.

TLDR; You're printing something this big, you probably know what you're doing.

It is important you understand this before buying.

I have a cheaper version without interior which is meant for smaller scales (as a model or for X-wing/etc..) and is pre-split for most printers: https://www.cgtrader.com/3d-print-models/miniatures/vehicles/old-dark-fury-interceptor