Modular Fuel Tank for Warhammer 40000 and Necromunda
Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_0
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_1
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_2
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_3
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_4
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_5
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_6
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_7
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_8
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_9
  • Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model_10
1 / 11
Useto navigate. Pressescto quit

Modular Fuel Tank for Warhammer 40000 and Necromunda 3D print model

Description

Modular fuel tank for your wargaming tables - fits great into Warhammer 40,000, Necromunda and other sci-fi settings. Thanks to being modular, it can be fitted with fuel pipe and platform on the fly as you need for your current game.

Key features:

  • modular and highly customizable model
  • with detachable platform that can easily fit 2 to 8 models depending on the size of their bases
  • dimensions of the fully fitted fuel tank is 64 x 146 x 89 mm
  • 28mm scale
  • print is tested on FDM Ender 5 printer
  • STLs properly scaled and are plug & print ready

Instructions:

1) To create fuel tank without top platform:

  • Print following: FuelTank_Middle, 2 x FuelTank_End and 2 x FuelTank_Stand - no supports required
  • Glue FuelTank_Ends on both ends of FuelTank_Middle
  • FuelTank_Stands doesn't require glueing to FuelTank_Middle but can improve overall stability, especially when using top platform

2) To add fuel pipe:

  • Print FuelTank_FuelPipe - there is slight overhang in the upper half of the model. This can be printed without supports but I recommend adding support if you are having problem with lower quality of the print in this area.
  • This part doesn't require glueing and can be easily put next to the FuelTank_Ends as shown on pictures. Fuel pipe can be easily attached and detached to fit your current game session

3) To add platform:

  • Print following: FuelTank_Platform (*), 2 x FuelTank_PlatformSupport, FuelTank_Ladder (1-4 pieces as you see fit)
  • Glue FuelTank_PlatformSupport to the bottom side of the FuelTank_Platform on designated area
  • Attach FuelTank_Ladder to slots on FuelTank_Platform. This is push-to-fit and doesn't require glueing but feel free to glue these parts together
  • Position completed platform on completed fuel tank from point 1) No glue is required - this will make platform detachable to fit your current game session needs. However, you can easily glue platform to the rest of the fuel tank if you wish so
  • Refer to pictures and exploded view to assemble fuel tank with platform correctly (*) - since FuelTank_Platform has grid pattern on the bottom it can cause bed adhesions problems on improperly calibrated printers. I recommend printing with very low speeds for initial layers or you can print FuelTankl_PlatformFullBottom. In this STL, there is no grid pattern on first few layers and should print easily enough on most printers

3D Printing Settings:

  • Infill:10-20%
  • Supports: Please, see instructions, but mostly not needed
  • Size of complete print: 64 x 146 x 89 mm

Like what you print?

Support me on Patreon to help me create & get exclusives: https://www.patreon.com/PrintaBoy

Follow my socials to see upcoming 3D prints:

Twitter: https://twitter.com/DaPrintaBoy Instagram: https://www.instagram.com/printaboy/ Facebook: https://www.facebook.com/PrintaBoy

Write comment
Item rating
1 0
C
chaosbroetchen
chaosbroetchen 2021-11-30 20:04:30 UTC
Recommended
Unfortunalety no part with insignia included (copyright issue? understandable...). Had to modify the parts a bit for resin printing. The main tank has the perfect size to fit onto a anycubic Photon build plate (hollowed like a tube and supported). End (hollowed), stands, plattform and plattform supports printed directly on the bed (elephant foot not really an issue there). Nice piece of terrain!
Modular Fuel Tank for Warhammer 40000 and Necromunda
$3.50
 
Royalty Free License 
Modular Fuel Tank for Warhammer 40000 and Necromunda
$3.50
 
Royalty Free License 
Ppetrruzicka
petrruzicka
(4 reviews)
Response 25% in 48.0h
3D Modeling
3D Print Modeling
Low-poly Modeling
UV mapping
Texturing
PBR modeling
Hire me

3D Model formats

Format limitations
  • Stereolithography (.stl) (8 files)7.37 MB

3D Model details

  • Publish date2021-04-14
  • Model ID#2983999
  • Ready for 3D Printing

Similar Models

to Modular Fuel Tank for Warhammer 40000 and Necromunda
Help
Chat