Introducing the Infiltrator!
I decided to make this the my first model in 1/32 scale.It can easily be scaled to 1/24 or 1/48 scale, though.
The length in 1/32 scale is 538.72 mm (21.21 in)
Features
- Full Cockpit interior.
- Room for engine LEDs and cable routing.
- The ship has a recess for an M6 / 1/4" nut on the bottom to mount it on display stands.
- Pre-supported STL files and Lychee Slicer Scenes for resin printing are included.
Info
- All files are optimized for resin printing.
- Min. required printer build volume: 192x120x215 mm (WxDxH)
- Print the wings and the fuselage with engineering resin (or similar that has little to no flex) to prevent any sagging. Don’t use an ABS-like resin. Cure the wings and the fuselage very thoroughly immediately after printing for at least 20-30 minutes (washed of course).
- A Commercial License, to sell 3D-Prints of my Models, is available on Patreon > NerdMaker
Join the NerdMaker Community
- YouTube > @DominicSchwarz
- Twitch > nerdmaker86
- Discord > 9jppu3AxJK
- Instagram > @nerd_maker_engineer
- Facebook > nerdmakerengineer
