Roronoa Zoro swords 3D print model

Thank you for your interest in my models! If you have any questions or comments, feel free to email me at geolino18@gmail.com or message me on Instagram @geolino_18.

Model information: In full scale, these katana models are about 35 inches or 900 mm.

The sword holder is about 980mm long.

These models were divided into 4 pieces and I didn't cut them into more pieces because it's better to cut them if planning to the size of your printer.

The support was divided into 3 parts. It was designed to be used fixed to the wall and can also be simply placed on a bookcase or table with the base down.

When printing the blade, I recommend not using PLA filament, it deforms easily. For me, the blade was perfectly straight when I printed in ABS.

If you're going to cut, I recommend the 3d builder program, it's very easy to use. Message me if you want help, so I can make an average of the size of the printers of people looking for stl files.

The sheaths are designed with some additional space on the inside so the inside edges can be lined with felt to protect the blade as it slides in and out.