YOU ARE BUYING THE STL FILES, NOT A FULL FIGURINE!

Mavuika + motorbike figurine based of the idle animation in the game. The figurine is about 23 cm tall and 34 cm long. The parts are designed to be printed on a elegoo saturn 3 ultra printer or printers with similar or bigger size. Downscaling has not been tested! some parts are tiny (see preview picture) and might fail to be printed.

The pack consists of:

• 43x stl file of unsupported parts (the parts are prehollowed)
• 43x stl files of supported parts
• some preview pictures and a 360° blend view
• a thank you letter with my contact in case something doesnt work

You will need to print 45 parts (2 parts have to be printed twice). The connections are made as a loose fit and will not hold on its own. You will need to glue them together. I recomand a very strong superglue, as the front wheel is only connected on 3 small areas with the whole build.

Disclaimer:I am not an expert in supporting 3d models for printing. Therefor i can not promise you that the presupported parts work for you. They did for me, therefor i added them. They might also be massivly over supoorted.

more pictures can be found on my artstation page:https://www.artstation.com/artwork/eR9QrJ