Genshin impact - Jahoda figurine with some aino bots. The figurine consists of 53 parts stls. Some have to be printed multiple times, totalling the fully build figurine at 67 parts. some parts are ment to be printed transparent if you desire to install lighting. Fully build you can expect a size of 300x250x300. All parts are designed to fit on a saturn 3 ultra printer with a build size of 218.88×122.88×250 mm. Any similar or bigger sized resin printer should have no issue.

The pack consists of:

• 53x stl file of unsupported parts (the parts are prehollowed)
• 53x stl files of supported parts
• 5x stl file of V2 part unsupported
• some preview pictures and a 360° blend view
• a thank you letter with my contact in case something doesnt work

The connections are made as a loose fit and will not hold on its own. You will need to glue them together.

Disclaimer:I am not an expert in supporting 3d models for printing. Therefor i can not promise you that the presupported parts work for you. They did for me, therefor i added them. They might also be massivly over supoorted.

more pictures can be found on my artstation page: https://www.artstation.com/artwork/zzAnbZ