Figure modeled in zbrush based on Vanny's antagonist from the upcoming FNAF game Security Breach.

• Each piece is decimated to a maximum of 350 k polygons to maintain the details of the seam and the mesh of the bottom.
• The exported measurement is 15 cm in character size not including the base.
• https://www.artstation.com/artwork/Kr2exR
• The head has two options:
  1. Head with attached whiskers.
  2. Head with loose whiskers, This is so that you can configure the printing of the menu that is most accurate for you.
• You have the file in Stl and Obj
• The RAR file contains two folders, the base and the character, in the character folder you will find 3 folders, the body, heads and knife, in the heads folder you will have the 2 options to print.

Fragile Parts Warning:

• The separate whiskers are thin so you may have problems with accurate printing.
• The knife, due to the size of the figure, the knife is in a thin size so it is recommended to impregnate resin and extract the supports carefully. Also its insert can be tiny so try to use a strong glue.

Tips:

• The handle of the knife can be somewhat difficult to fit in the hand, try to sand the part that is hidden by the hand to have the piece looser.
• As mentioned before, the insert of the knife is small so stick it after having painted it and after having glued it in the hand, if you glue the piece without before having glued it to the hand there will be no way to place it.