Hi, so now we're starting ;-). My first statue is a bust of a witch called Baba Yaga. This statue is designed mainly for DLP / SLA printers. The total height is 80mm(gray resin). The size of the skin resin figurine was reduced to 80%. You can use a solid model, hollow model or hollow model with supports. If you change the scale, I recommend to use a solid model and make it hollow in the Meshmixer and add support in your slicer software. I hope you will enjoy this ugly witch ;-)
A sample print was made on my Anycubic Photon. I recommend printing without AA (anti-aliasing). I used Ameralabs AMD3 resin (https://ameralabs.com/) with these print parameters: 5 bottom layers 70 bottom exposure time (s) 0.03 layer thickness (mm) 4.4 normal exposure time (s) 1 Off time (s)