Everybody likes orcs ....... hope. So here's one little bit different cyborg-orc for you. This bust is designed mainly for DLP / SLA printers. The height of the body including the weapon is 77 mm. Total height including base is 10.2 mm. You can use a solid model or hollow model. If you change the scale, I recommend to use a solid model and make it hollow in the Meshmixer and add support in your favorite slicer software. Enjoy this guy ;-)
A sample print was made on my Anycubic Photon. I used Ameralabs AMD3 resin with these print parameters: 5 bottom layers 70 bottom exposure time (s) 0.03 layer thickness (mm) 4.4 normal exposure time (s)