Will the players try to storm the gates, or find a sneaky way around them? The possibilities are endless, and the addition of a gatehouse will make your town more memorable than ever.

Test print and assembly: https://youtu.be/2UCwHOXK2iU

Check the town walls here: https://www.cgtrader.com/3d-print-models/miniatures/other/town-walls-set

FDM: All files can be printed without supports; however, for the best quality I do recommend to throw in some custom supports under long bridges. Use wide brim for small models like doors, lanterns, etc. Print doors and gates with hinges up. Infill: 10-15%

Resin: If you choose to print doors on resin printer, print them flat on the build platform (rotate with hinges point up). You won't need any supports if you print this way.

Use a piece of thick wire (1-1.5mm) or 1.75mm filament to secure the doors' in place. Diameter of the holes is 2mm.

——————————————————————————

All my designs are protected by copyright laws. Upon downloading you agree to use the files for personal purposes only.This means you do NOT have the right to sell 3D prints of the digital files, including selling the products from moulds.

If you would like to legally sell 3D prints of my models, please join commercial tier on my Tribe or contact me for other options. Links below! The digital files (.stl and other formats) are never to be re-sold, shared, remixed or given away.

——————————————————————————