Signal tower (Stellwerksturm) in H0-scale based on the tower in Erfurt, Germany. This tower is perfect for 3D-print, while it´s quite small and equally easy to re-trofit on an excisiting Model Railway (Eisenbahn) due to it small foot print. One figure representing the signal tower crew is included.Ready-to-print super detailed items set for H0-scale Model Railroad. The 3D-models with supports for resin print are included and all neccesary preparations are made to simplify print. Simply download, un-zip, slice and print. Enjoy!

The models are developed and test printed to verify function, detail and printability. Testing has been performed on a range of 4k and 8k resin printers.

We recommend using one of the following resins for high strength and super detail:

• 70% Anycubic ABS-like resin & 30% Anycubic Tough resin

IMPORTANT GENERAL NOTES FOR SUCCESSFUL 3D-PRINTING:

• LAYER THICKNESS: 0.03mm (to avoid visible layer lines)
• WASHING: Wash all items clean from resin preferrably in a washing mashine 6-8 minutes. Leave all items to dry after wash properly. Preferrably over-night / 24h (to avoid warp).
• POST CURING: All sides, including inside surfaces, MUST be exposed to the UV-light. Recommended time: 4 minutes.
• Paint the details immidiatly after post-curing using a primer. We recommend TAMAIYA Surface Primer Fine Gray (to avoid warp).

*The Editorial licence of course includes unlimited printing for your own Model Railroad. However, the 3D models provided in this set must NOT be used for commersial production or re-sale of the 3D-models.