3D model of Rokkaku Yukimi for 3d print
- -Files compress with Winrar (.rar)
- -Extract and import on your favorite 3d print software.**
- -Test print done with Ultimaker Cura and Anycubic 3d printer.
- -Correctly installed Low consumption Led bulb (do this at your own risk and with professional supervision)
FORMAT:
Files after extract:
- Rokkaku Yukimi PART1 STL
- Rokkaku Yukimi PART2 STL
- Rokkaku Yukimi PART2 WINDOW STL
- Rokkaku Yukimi PART3 STL
Dimessions:
- PART 1( the leg base) ---------------------------111.3 x 111.3 x 76.0 mm
- PART 2 (body, house) --------------------------- 93.3 x 84.8 x 70.8 mm
- PART 2 WINDOW -------------- 26.4 x 20.9 x 1.8 mm (PRINT X6 TIMES)
- PAR 3 (roof)----------------------------191.5 X 170.7 X 83.9 mm
My Recommendations and settings:
- part1: Rotate the object to print without supports (see image in CURA program)
- part 2: I print this without any support
- part 2 window: print one to one is best for me. (print x6)
- part 3: print without support at 75 % speed
- While printing part 3 glue the windows with part 2 and when finish done I glue the enteri part 2 with 3 taking care of where it is in the center.
(you can choose to stick the pieces or not)
-GRANITE PLA FOR ALL PIECES
-NOZZLE: 203º First layer 200º after
-BED: 63º first layer After: 38º
-70% - 75% Speed
Thanks for watching!!!
