This lampshade was modelled with inspiration from natural geometric shapes, honeycomb pattern of beehives. When is enlighten with warm white LED bulb, it gives soft and comfortable feeling to you and surrounded space.

Parts: 3D printed body / 3D printed cover / Bulb Holder: E14 Bulb with 28mm thread and clamp ring / LED bulb max 40W (warm white, white or yellow depends on your preference) / Screw: 3 pcs M3x10mm / White power cable.

DIMENSIONSDiameter: ø150 mm.Height: 137 mm.

3D PRINTING SETTINGS: Rafts: No / Supports: No / Resolution: 0,3mm / Infill for body: 100%. / Infill for cover: 30% / Perimeter: 2 / Solid bottom layer: 2 / Solid top layer: 3 /Print time: about 15h depends on printer settings.Optional: Vase mode for body (in this case screw holes should be separately printed and joined with body).

Model shown in photos was printed using Vase mode with white PET-G material.The point is: walls should be as thin as possible to let in more light.

• 3D file format: STL.• Files: 2 (body, cover).

Disclaimer:I always print lampshade models with PET-G material because heat distortion temperature is 70°-80°.Use only LED bulb max 40W. It does not get hot or melt.Please make your own judgement when deciding what bulb to use and what material to print with.I will not be responsible for any damage caused by using this model or suggestions given.