Light up your room with this awesome mini street lamp.

To assemble the lamp, please add a few drops of super glue between the Base_Bottom and lamp files. The Lid_Top should be removable, so you can add the light source (I suggest electric candles) inside the lamp.

Note: Just a friendly reminder, but the STL files are not colored. The cover image is just a concept for the final design, but this will also allow you to choose whatever color you want to match your room decoration.

Disclaimer:

The idea behind this lamp is to add a light source to get the full effect, however, please DO NOT use real candles due to fire hazards. 

As a safer alternative, use electric candles instead, as they will provide the same aesthetic results.

The assembled lamp dimensions are the following (mm):

Height- 346

Width- 150

Depth- 131

Sculpting software used: Blender

Render method used for the previews: Cycles

Filament: PLA

Slicer used to 3D print: Ultimaker Cura

Settings I've used to 3D print:

Standard quality - 0.2mm

Infill - This is a 3 piece item. However, I suggest having a higher infill for the Base_Bottom part. This will increase it's weight and improve the lamp's stability.

Supports - No supports should be needed.

Speed - 50% first 20 layers and 100% for the rest

Plate Adhesion - Skirt

Cooling - Enabled

Travel - Retraction Enabled