3D model descriptionDesigned by HIDAKA.Practical 3D printable designs from Japan.

This kitchen sink bag holder was designed to solve one simple everyday problem.

I wanted a simple way to keep a plastic bag or drain net securely in place while using it, but still be able to remove it easily when it was time to throw away the waste.

Many conventional kitchen corner holders either require a dedicated net, allow the bag to move during use, or make removal more complicated than necessary.

Instead of adding hinges, clips, springs or other mechanisms, I designed a simple two-piece structure consisting of a BASE and a PRESSER.

Place a bag or drain net over the BASE, then fit the PRESSER onto it.

The mating shape between the BASE and PRESSER helps hold the bag or net securely during use.

When it is time to dispose of the waste, the PRESSER can be easily removed from the BASE.

Simple.Reliable.Easy to use.

FeaturesSimple two-piece designConsists of BASE and PRESSERHolds plastic bags or drain nets securely between the two partsHelps reduce slipping and movement during usePRESSER can be easily removed when disposing of wasteNo screws requiredNo springs requiredNo hinges requiredThree-leg design for stable placementLeg positions are designed to avoid the curved corners of many kitchen sinksSlightly enlarged contact area at the end of each leg for improved stabilityDesigned for easy everyday useHow to UsePlace a plastic bag or drain net over the BASE.Fit the PRESSER onto the BASE.Use it as a kitchen corner waste holder.When the waste is ready to be disposed of, remove the PRESSER.Remove the bag or net from the BASE.

The design focuses on a simple relationship:

Hold securely when needed.Remove easily when needed.

This model is released as part of the HIDAKA Series.

If this design solves the same problem for you, please consider following HIDAKA.

More practical, problem-solving designs are coming soon.

License

CULTS Private Use

You may

Download and print this model for personal use

You may not

Redistribute or resell the digital filesModify and redistribute the digital modelSell physical 3D printed products without appropriate commercial permissionRemove or alter the embedded HIDAKA logo

Copyright HIDAKA

Problem-solving engineering from Japan.

About HIDAKA

Problem First.

Real problems.Practical engineering.Continuous improvement.

HIDAKA is the personal brand of a Japanese manufacturing engineer with more than 20 years of automotive product development experience.

Every design begins with a real-world problem.

The solution should be simple.The design should be practical.

Every design is improved through real-world use and continuous refinement.

3D printing settingsMaterial

Use any material suitable for your intended use.

BASE

PLA, PETG, ABS, ASA or other rigid materialsTPU is not recommended for the BASE

PRESSER

Material can be selected according to your preference and printing environmentNotesThe BASE should be printed with a rigid material to maintain the intended shape and fit.Material selection is otherwise up to the user.Fit between the BASE and PRESSER may vary slightly depending on material, printer calibration and print settings.Sink dimensions and corner shapes vary between manufacturers and models. Please check the dimensions of your sink before printing.