Empanada and Dumpling Maker 3D print model

This model will help you make perfect looking Empanadas or Dumplings every time. The model size is based on traditional Argentinian Empanadas but you can scale the model up or down easily in your printing software to make other sizes as you wish.

Have fun!

Printing Settings: When printed in original size it has the following specs: ~80g of material (PETG) with 50% infill. Assembled (closed): 77x120mm x 40mm High I recommend printing with a food safe material such as PETG. Depending on your printer I recommend printing with a small amount of support with an overhang angle of 50. After printing: Drill clean the small holes in the hinges and assemble with a small metal pin (e.g. nail) in each hinge so the two parts pivots around the hinges.

    Item Rating01
    • ccuecig
      2020-04-14 02:42
      Not Recommended
      Everything printed fine until it printed the hinges. All 4 hinges did not print securely to the model and on one side both hinges fell off with the supports after printing completed. The rest of the design is fine, I will try to add new hinges in the design and reprint. 6 hours of printing wasted though.
    Empanada and Dumpling Maker
    $3.00
    All prices are exclusive of VAT
    Save with CGTrader Credits
    Royalty Free License
    Products under Royalty Free License can be used without liability to pay any license fees for<br/> multiple lifelong uses, or sales volume of final product after being paid for once. The product<br/> may not be sold, given, or assigned to another person or entity in the form it is downloaded from the site.<br/> <a href='/pages/terms-and-conditions#general-terms-of-licensing' rel='nofollow' target='_blank'>Read more</a>
    Response 0% in 48.0h
    3D model formats
    • Stereolithography (.stl) (2 files)-
    • OBJ (.obj, .mtl) (2 files)-
    • Autodesk 3ds Max (.max) (2 files)-
    • 3D Studio (.3ds) -
    • Autodesk FBX (.fbx) -
    3D model details
    • Publish date2019-01-21
    • Model ID#1877228
    Help