Side table designed to build with 3D printed joints and 27mm wooden rods. On top of the structure you can place a round or square wooden board or any other shape you need, as long as it does not exceed the dimensions.

It has a Nordic Scandinavian style. It consists of three legs joined by a joint and 3 more joints that join each leg to the board. It is approximately 53 cm high, depending on the height of the board you prefer to use.

Attached is an image showing the dimensions and placement of the rods. Its dimensions should be of: 3x61 cm. In addition, 6 small screws are needed to fix the legs and the board to the joints.

Print with the highest layer height and line width possible to achieve maximum strength.

Take a look at the rest of the pieces of the collection in our profile.