Modular Drawers Evo

Modular Drawers Evo 3D print model

Modular Drawers Evo is a customizable, modular drawer system perfect for Engineers, Makers, and Hobbyists! Organize all your small parts from nuts and bolts to resistors, switches, and LED bulbs. No workshop is complete without an organization system!

Features:

  • 2 types of drawers – modular and single bin
  • 3 bin types – small, medium, and large
  • 3 bin sizes – 1/3 height, 1/2 height, and full height
  • 2 drawer modules

Print at 80-90 mm/s without supports or rafts! Rail and Slot test pieces have been added for users to optimize their print settings. Looking for a less traditional, honeycomb style drawer system? Try The HIVE Evo! https://tinyurl.com/hive-evo

Questions? Need support? Send a personal message or contact me directly at o3dofficial@gmail.com

Tips:

  • The knob should fit easily in the drawer. If it does not for some reason reprint the knob at 99%. Forcing the knob could cause the drawer to crack.
  • Glue the knob to the drawer
  • Print the rail and slot tests first to optimize your print settings. Faster speeds may cause slight warping which will affect the fit of the rails in the slots.

The modules shown in the pictures were printed at 85mm/s.

Recommended Settings:

  • 0.3mm
  • 80-90mm/s fast print module and all other components
  • 60mm/s for regular module
  • 5%-10% infill for module
  • 10%-15% infill for drawers

By downloading you agree to the terms and conditions of use https://tinyurl.com/O3D-model-use-terms

A
adam-amott
Awesome model! Could you upload the rail and slot test pieces?
o3d
o3d
The rail and slot test pieces are included in the STL folder
C
cortexian-0
Excited to try this out! What was updated on the Jan 1 2021 release?
o3d
o3d
I re-added the knobs in all 3 formats. Today I added the wall mount piece
o3d
o3d
The rail and slot system has the same dimensions but the modules will fit differently together. As they have different dimensions
N
nate-ridderman
The downloads could use some organization. The update zip only contains fast print modules. It would also be nice to have a README that explains terms and how files are organized.
A
andrew-6007a1
Could you please provide a bit more information on why there's two modules? I see that they have different rail/slot configurations, but a bit more detail on why there's two versions would be helpful - e.g. should I use one for the bottom layer, the other for more, etc.?
Item rating
13 1
Recommended
Everything fit together very well without any trimming or sanding. I printed some of the larger pieces with a brim to prevent lifting/warping, but the bins were fine with just a skirt.
Recommended
Bought and printed it - it worked instantly without any rescaling etc.
Modular Drawers Evo
$6.97
 
Custom License 
Modular Drawers Evo
$6.97
 
Custom License 
Response 97% in 0.8h
3D Print Modeling

3D Model formats

Format limitations
  • Stereolithography (.stl) (3 files)288 KB
  • Autodesk FBX (.fbx)95.8 KB
  • OBJ (.obj, .mtl)95.8 KB

3D Model details

  • Publish date2020-10-05
  • Model ID#2639893
Help