High-detail exterior gateway designed for architectural models, dioramas, and decorative displays. This elegant entrance structure features clean lines and ornamental proportions, making it suitable for miniature buildings, landscape scenes, and creative projects.

The model is optimized for both resin and filament 3D printing. It delivers sharp details in resin and strong structural stability in filament printing.

Perfect for:• Dioramas and scale models• Architectural mockups• Miniature scenery• Decorative display pieces• Creative hobby projects

The design balances fine decorative elements with structural strength to ensure reliable printing results.

Resin Printing Configuration (High Detail – Recommended)Global Settings

Layer Thickness: 0.05 mmRising Height: 6 mmMotor Speed: 1.8 mm/sLight-off Delay: 3 s

Bottom Settings

Initial Exposure: 40 sBottom Layer Count: 6

Normal Exposure

Exposure Time: 2.8 – 3.0 s

Supports

Height from Platform: 6 mmSupport Type: Column Support – MediumDensity: 40–45%Angle: 35°–45° tiltBase Shape: Skate

Resin Tips

• Slightly tilt the model (35–45°)• Avoid printing completely vertical• Add extra supports under heavy sections• Use Standard or ABS-like resin

Filament Printing Configuration (PLA Recommended)Basic Settings

Layer Height: 0.20 mmWalls: 2–3Infill: 15–20%Nozzle: 0.4 mmPrint Speed: 50–60 mm/s

Bed & Temperature (PLA)

Nozzle Temperature: 200–210°CBed Temperature: 55–60°C

Supports

Enable Supports: Yes (Touching Buildplate)Support Angle: 50°Support Density: 12–15%

Orientation

• Print standing upright for structural strength• Use brim if base adhesion is weak

Strength Recommendation

If the gate is tall:

Increase wall count to 3

Increase infill to 20%

Slow speed slightly for better layer bonding