Bring a touch of modern, organic aesthetics to your space with this unique Fruit Wheel decorative piece. Designed with flowing, ceramic-like curves and striking spikes, it serves as an eye-catching wall sculpture or a highly unconventional fruit holder.

100% Support-Free DesignCarefully engineered with symmetrical flat planes on both sides. Simply place the flat cut directly on your print bed, and the entire model will print perfectly without a single drop of support material! Clean, efficient, and ready to use right off the printer.

Built-in Wall Mount (Keyhole Slot)Features a perfectly integrated keyhole slot on the back for easy, flush, and secure wall hanging.

Screw head clearance (large hole): 12 mm

Slot width (small hole): 8 mm

Hole depth: 8 mm

Dimensions & Practical Scaling Options:

Original Scale (100% - Centerpiece Size): Max Outer Diameter: 340 mm | Inner Ring: 120 mm. At this size, the gaps between the spikes are ~64 mm, making it an ideal holder for standard fruits like mandarins, kiwis, lemons, or small apples.

Compact Scale (62.5% - Standard Bed Size): To fit standard 220x220 mm print beds, scale the model down to 62.5% (0.625 multiplier). This results in a max outer diameter of 212.5 mm. The gaps become ~40 mm, which is perfect for small decor spheres, walnuts, candies, or tiny clementines. (Note: scaling down will proportionally reduce the size of the wall mount keyhole, so you will need a smaller nail/screw).

Recommended Print Settings:

Supports: None (Print flat on the cut surface).

Layer Height: 0.16 mm - 0.20 mm for smooth organic curves.

Infill: 10-15% (Gyroid or Cubic).

Material Ideas: Looks incredibly premium in Matte PLA, Marble/Stone-fill, or Wood filaments to enhance the organic vibe.