Christmas is coming! And if you want to be sure that Santa Claus will find your home you need the Christmas Star Light by Ocrobus 3D Maker!

In download there are 2 versions of the star:

• 5-POINTED STAR: composed by 10 pieces
• 7-POINTED STAR: composed by 14 pieces

There are different textures available for both versions. You can choose the style that you prefer!

Each piece is firmly joined to the others thanks to the new patented system OSZ (Ocrobus Spherical Zip).The opening and the closing directions are shown in the related imagines.The assembly is simple and your kids will love it.

Here it is the instructions:

1: Print all the pieces using the color that you prefer, it's better not to use a dark color.

2: Fold gently each piece in the middle using hot water or an hairdryer.

3: Assembly 5/7 pieces togheter in order to construct the lower surface, then do the same with the others 5/7 pieces and obtain the upper surface.

4: Take the light wire and make a knot. In this way you can block the wire inside the star and then you can hang the star up using the lighting wire itself.

Put the lighting wire between the two star surfaces and after join them around the whole border. Don't forget to follow the right OSZ closing direction.If you have some troubles you can refer to the images in attachment, I've sorted them in the sequence of mounting.

This is the Amazon web link of the light wire I used for my stars:

https://www.amazon.it/gp/product/B01HOAV7L4/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

Have a nice print,Ocrobus 3D Maker

PRINT DATA

• MATERIAL: PLA or Other
• NO INFILL
• NO SUPPORTS