3D MODEL DESCRIPTIONHello friend, today I wanted to bring you on my profile, one of the most famous symbols of Harry Potter, I made it so that you can hang it on the wall, behind the project, there is a hole that allows you to hang it on the wall with a nail, a screw, or better still a wall hook.

Inside the Always symbol, I wanted to insert the track number, with the Harry Potter themed caligraphy, I find it very original.

My advice to the press is to use simple black PLA for the symbol and the letters, instead, for the center, I would use the white fluorescent PLA, in the evening in your room, with lights off, you will see the writing light up.

I also want to remind you, that all my designs are interlocking, and have a tolerance of 0.50mm standard tolerance of all printers, if you like many others do not know what tolerance your printer has, I suggest you download my tolerance test, It’s on my profile.

As always I want to thank you for spending your time in viewing my project, and if you find it interesting, I suggest you take a look at my profile cults, because you will find a lot of interesting projects, And I’m sure you’ll find something for you, and I also remind you to leave me a like if you appreciate my work.

Good press friend and become a follower of mine

3D PRINTING SETTINGSLayer 0.10 / 0.15Infill 10%Top and Bottom Layer 4Perimeter Layer 3Speed 50/60 mm/s