Soap Holder Dish Plant Autumn - 2 Models 3D print model

Soap Holder Dish Plant Autumn - 2 Models

This model is made to help drain the water from the soap more efficient than the standard soap holders on the market, and the plus is the design of the dish holder has the pattern of two leaves of an autumn tree.

The model consists of two parts:

• The base: keep the drained water and hold the dish on top;
• The dish: secure the soap and with the patter naturally have holes to drain the water to the base under. You can separate the two parts to drain the excess water and/or clean.

Print Tips*:

• Layer Heigh: 0.2mm;
• Infill: 20%;
• Supports: no need;
• Print Speed: 50 mm/s
• Build Plate Adhesion: Brim 10 lines;

• Material: PLA.

• These are my recommendations for the same result then you can see in the pictures, but you can change the settings to fit your needs.

If you want to buy the part already printed you can follow the link to our shop on Etsy: https://www.etsy.com/uk/listing/1104933945/soap-holder-dish-grid-tray-bathroom?ref=listings_manager_grid

Thank you for your time, TugaPrints3D