3D MODEL DESCRIPTIONHello friend, today I wanted to bring on my profile a batman-themed piggy bank, for all lovers, like me of the Batman series.

The piggy bank is divided into several parts, and for this need of the use of glue, for greater strength, for the anchoring of the pieces, I inserted inside them 4 flaws that will stop the two pieces in the bonding phase.

My advice is to print the box and the back cap in black, along with the support base, instead the center of the logo, yellow, using the simple PLA or PETG in case you want to make it indestructible.

PLA 205° / 50°PETG 230° / 65°

The cap on the back side is very easy to screw on and I have left a standard screwing tolerance for all printers.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that’s right for you, I’ll also remind you to leave me a like if you appreciate my work.

Good press friend

3D PRINTING SETTINGSLayer 0.15 / 0.20Infill 10%Infill Base 20%Top and Bottom Layer 4Perimeter Layer 3Speed 50/60 mm/s