This Halloween lamppost is designed to be easy to print on a 210 × 210 × 210 mm build plate.

Important Information

• The complete lamppost consists of 10 parts. All parts are correctly named and numbered for easy identification.
• The parts are numbered 01–10, starting with the bottom to upwards from Base Stand (01).
• Detailed assembly images are included, showing how to assemble the lamppost and where each part is positioned.
• The parts are designed to connect easily, with no supports or additional tools required for assembly.
• For additional stability, you can glue the joints or use screws where needed.
• 8 of the 10 parts can be printed without supports.
• Decorative side panels are not included. However, a standard/non-decorative panel is included. Print 4 copies of this panel to complete all four sides of the lamp.
• Starting Height 72cm (You can adjust the height)

Printing Information

• There are two types of middle column parts.
• The 03_MiddleColumnTop should be attached directly to the 04_LampFrameBottom part.
• If you would like to make the lamppost taller, simply print additional copies of 02_MiddleColumn and stack them together to increase the overall height.
• You will also need 4 screw pins to connect the different sections of the lamppost. Please print 4 screw pins.
• The recommended print settings have already been prepared in the included 3MF file. You can open the 3MF file in your slicer and adjust the printer settings according to your printer and filament.

Lighting Options

The lamp housing can accommodate a light with a diameter of approximately 80 mm (8 cm).

Option 1 – Battery-Powered Light

A small battery-powered under-cabinet or puck light can be placed inside the lamp housing. This provides a simple and completely wireless lighting solution.

Option 2 – Wired Light

The model includes wire-routing holes throughout the lamppost, from the base to the top. This allows you to run a power cable through the different sections and install a wired light.

Why You'll Buy This Model

• Easy to print
• Easy to assemble
• No supports required for most parts
• No special tools required
• Adjustable height
• Suitable for Halloween decorations
• Can be used with battery-powered or wired lighting
• Designed for a 210 × 210 × 210 mm build volume

Need Help?

If you encounter any mesh errors, printing issues, assembly problems, or have any questions about the model, please feel free to send me a message. I'll be happy to help and fix any issues as soon as possible.

Thank you for your support, and Happy Halloween!