A stylized crawling pumpkin monster with expressive eyes, a wide toothy grin, and articulated forelegs designed to clip together post‑print for dynamic shelf poses on edges, desks, or mantels. The model is separated into body, left/right arm segments, eyeballs, and stem for easy multicolor printing and quick assembly without screws.​

Key featuresPoseable arms: snap‑fit cylindrical joints give smooth movement and hold positions while protecting against over‑tight tolerances on FDM printers.​

Paint‑optional details: separate whites and pupils let users print in white/black or paint for highlights; inner mouth clearance avoids stringing.​

Edge‑sitter stance: flat belly and forward‑dropping feet designed to balance on shelf edges for playful display.​

Technical specsFormat: STL; parts labeled for orientation; manifold and error‑checked.​

Recommended print settings: 0.2 mm layer height, 3 walls, 10–15% infill; minimal tree supports under eyelids only; no supports for the body when oriented as provided.​

Materials: PLA for bright color and crisp edges; PETG for tougher joints; super‑glue optional for permanent arm attachment.​

Usage notesPhotograph perched on a shelf and in a front‑lit hero shot; include a short assembly guide and a tip to slightly sand male joints if tight. Offer as a bundle with matching pumpkin mug or sign to raise average order value during Halloween promotions.​