Ultimate Christmas Santa 3D Print Bundle - 6 Premium STL Models for Festive Joy! Bring the joyous spirit of Christmas right to your 3D printer with this unique Ultimate Christmas Santa 3D Print Bundle! This exclusive collection features 6 highly-detailed Santa Claus STL models, perfect for adding a heartwarming festive touch to your home, crafting personalized holiday gifts, or enhancing your seasonal collection.

Each model captures Santa's iconic charm in various delightful poses, from spreading cheer to holding treats, making this bundle a standout addition for any 3D printing enthusiast or fan of the holiday season.

--- PLEASE NOTE --- This is a DIGITAL DOWNLOAD (STL files) only. No physical product will be shipped to you. You will need a 3D printer to create these models.

--- WHAT YOU GET ---

6x High-Quality STL Files of Unique Santa Claus Models, including:

The Candy King: Santa holding a beautifully ornate bowl, perfect for sweets.

Joyful Santa: Santa with both arms raised in a cheerful, celebratory pose.

The Greeting Santa: A classic Santa warmly waving Hello.

The Pose Master: Santa in a dynamic pointing gesture.

Gift of Joy: A touching scene of Santa presenting a gift to a child.

The Merry Stander: A timeless, classic standing Santa pose.

Default model heights range approximately from [100mm - 150mm / 4 - 6 inches] (Can be easily scaled in your slicer software to fit your desired size. Please replace this bracketed text with the actual approximate height range of your models.)

(Most models are designed as single pieces, and some come pre-supported for Resin if applicable, or unsupported where general supports are sufficient. Please refer to printing recommendations.)

These models are designed for enjoyable printing and painting, with clean details that truly capture the festive spirit.

--- PRINTING RECOMMENDATIONS --- These are recommended starting points, and you may need to adjust them based on your specific printer, material, and desired finish.

For FDM (Filament) Printers:

Layer Height: 0.12mm to 0.20mm (for a balance of detail and print time)

Infill: 10-15% is typically sufficient for display models.

Supports: Yes, most models will require supports, particularly under the arms, chin (for some poses), and any overhanging elements.

Recommendation: We highly recommend using Tree / Organic Supports in your slicer software for best results and easier removal, especially for complex areas like under the beard or arms.

Nozzle Size: 0.4mm (standard)

Material: PLA (recommended for ease of print and paint)

For Resin (SLA/DLP) Printers:

Layer Height: 0.03mm to 0.05mm (30-50 microns) for maximum detail.

Hollowing: We recommend hollowing larger models (e.g., 2mm walls) to save resin and improve print success.

Drain Holes: Be sure to add 1-2 drain holes near the base of any hollowed model.

Supports: The models will require light to medium supports. Angling the models 30-45 degrees can often help reduce the total support needed and improve surface finish.

Material: Standard UV Resin (405nm)

--- TERMS OF USE --- This digital file bundle is for PERSONAL, non-commercial use only.

You may not resell, share, or distribute the digital STL files in any way.

You may not sell physical prints made from these models.

If you are interested in a commercial license to sell physical prints, please contact us directly.

Thank you for visiting our shop! If you have any questions or require assistance, please feel free to send us a message. We're here to help bring your festive creations to life!