You can transform your sleeping Tamiya MB01 into RWD drift car with very little cost.

I applied rack and slide steering which allows for drifting at deep angles.

Necessary parts

M3 nut-50pcs

M3 set screw

5mm-6pcs, 10mm-1pcs, 12mm-2pcs, 15mm-4pcs, 20mm-2pcs

M3 countersunk bolt

8mm-20pcs, 10mm-20pcs, 12mm-6pcs, 15mm-2pcs, 50mm-2pcs

M3 bolt

6mm-8pcs, 10mm-17pcs, 12mm-3pcs, 15mm-8pcs, 22mm-2pcs, 25mm-2pcs

M2countersunk bolt

4mm-4pcs, 8mm-2pcs

inner3mm, outer8mm, t3mm bearing-4pcs

https://ko.aliexpress.com/item/1005003936265564.html?spm=a2g0o.order_list.order_list_main.613.6733140fjuvUYN&gatewayAdapt=glo2kor

dia 15mm, thickness 3mm magnet-4pcs

https://www.aliexpress.com/item/1005004276902194.html?spm=a2g0o.order_list.order_list_main.28.171c1802Yf76KU

3mm shaft-cut to use

23mm-4pcs, 27mm-2pcs, 32mm-2pcs, 40mm-2pc, 52mm-2pcs

additional 4.8mm joint ballend & cap- 2set

Necessary tools

M2, M3 Hex wrench

Drill - 2.0, 2.7, 3.0, 3.1mm

M3 tapping tool

Plus driver

File, knife, saw....etc.

Necessary RC parts

Transmitter, receiver

Li-po(2s 3000~5000mah)battery

Gyro