Desktop Industrial robot 3-10 Scaled Phone holder or design 3D print model

Hi there! The model can only be used for personal purposes and cannot be used for mass production or shared with others. You could read about these terms in the private agreement. If you have any questions, feel free to reach out; I'm here to help with problem-solving. During model creation, I pay great attention to minimizing the need for supports during 3D printing. This way, I save you time, money, and energy, while also being mindful of the environment. Additionally, the model will turn out much more aesthetically pleasing. This model has been tested, printed, and you can see this in the pictures as well (flawless).

Useful informations: -Before printing the screw nuts please scaled up the nut size 105% .

You need to buy:

• -M2 x 5 mm 47pcs socket head cap bolt + 47 pcs nuts
• -M4 x 16 mm 3pcs socket head cap bolt +3 pcs nuts
• -M4 x 18 mm 4pcs socket head cap bolt + nuts
• -Bearings 1pcs :30x55x9 sealed bearing
• -Springs 19*21*30mm tall from a wire that is 1mm thick 4pcs
• -Filament:-Black:Printing time:710min Weight:385gramm
• -Blue:Printing time:1020min Weight:645gramm
• -White:Printing time:40min Weight:25gramm
• 1pcs model glue
• 1pcs hocko CA40 phone holder

Other tools:

• Soldering iron for inserting the threaded nuts.
• 1pcs socket hex key 1,5mm

In FLSUN V400 3D printer (0,2mm/layer):

• Total time: 29hour 30minutes
• Total Weight: 1055gramm

The assembly is aided by the 3D model .f3z file, from which you can see how to assemble everything to obtain a nice, usable desktop robot.

Happy printing and model building! :)

If you don't feel like assembling it yourself, please click the following link where you can purchase the pre-assembled product:

Best regards, Martined.