ARTAIR HEAD UNIT SERVO LONG 19MM WITH VTX MOUNT 3D print model

Design inspired by nature and especialy insects, brings aerodynamics and functionality.

Rotating camera system suitable for frames MARK4 V2 10, 9 and 8 inches with 35mm X 6mm stands.Probably suitable for other frames with similar dimensions, not tested (!)

Customisation is possible uppon written request, price discussed separately.

If you have any questions please do not hesitate to contact me in the comments section or write a letter to artair.ds@gmail.com

Please note that this Head unit only compatible with:19 mm cameras, like analog camerasOnly with SG92R servo positional servo

In order to achieve 180 degree of rotation you need to buy additionaly PWM signal amplifier for servosGoPro compatible. VTX Placement holes supports 20.5x20.5 mm, 25.5x25.5mm,30.5 × 30.5mm.

P.S. There is Short version of this servo camera mount without VTX placement cage, look in my other designs.

3D PRINTING SETTINGS

This model is distributed in form of .3mf file, with optimal settings for 3d printing.

However, it is advisable to usePETG/CoPET filament4 wallsOrganic supports15% gyroid infill4 walls0.12 layer height, ( 0.2 for first layer is good)