ARTAIR FPV HEADUNIT FIIXED CAMERA MOUNT 19MM WITH VTX MOUNT 3D print model

3D MODEL DESCRIPTION

Design inspired by nature and especialy insects, brings aerodynamics and functionality.

Rotating camera system suitable for frames MARK4 V2 10, 9 and 8, 7 inches with 35mm X 6mm stands.Suitable for 19mm cameras.

Probably suitable for other frames with similar dimensions, not tested (!)

Customisation is possible uppon written request, price discussed separately.

If you have any questions please do not hesitate to contact me in the comments section or write a letter to artair.ds@gmail.com

Please note that this Head unit only compatible with:19 mm cameras, like analog cameras

VTX Placement holes supports 20.5x20.5 mm, 25.5x25.5mm,30.5 × 30.5mm.

GoPro compatible.

P.S. There is a Short version of this mount without VTX placement cage, look at my other designs.

3D PRINTING SETTINGS

This model is distributed in .3mf file, with optimal settings for 3d printing.

However, it is advisable to usePETG/CoPET filament4 wallsOrganic supports15% gyroid infill4 walls0.12 layer hight, ( 0.2 for first layer is good)