Rotating Iris type dining table. Most parts are made from wood. You can put dinnerwares inside the table,such as forks, knife, spoon, plate, wine. When you rotate the second wood plate, the dinning table open or close. There are 10 side wall below the bottom plate as legs. And 5 of them are movable. You need to prepare some bolts, wood screws, and handtools to assemble parts together. The table height is 80cm, the center hole is diameter 80cm, and the table diameter is 200 cm. STEP, DXF, STL, CAD plan(pdf), partlist(bill of material),3DPDF are included in the attachment. In theory, the files can be used to manufacture parts directly. But it is best to understand the structure first, and then you can make some change as needed. Ignore the FBX and OBJ format files, they are only used to meet cgtrader's requirement.