A simple spool hanging solution that requires only one non printed part (a brass swivel) and 4 small wood screws 2-3mm diameter. Flush/low profile, not machine screws (has to bite into the underside of the LACK). Filament threaded through holes to pin swivel in place. Print with PETG for best longevity of this part. This works for every spool I have used, but if you need a larger or smaller diameter version of this for odd spools, contact me with the needed dimensions and I will make the edits required and add your custom version to this listing.

Super low friction due to fishing swivel, fits within IKEA LACK enclosure with Prusa i3

Print flat and bend the arms down, before or after using a torch or lighter to soften up and bend the points down (toward the side that touched the build plate!)

settings: 60% infill and 3 walls for both parts

Swivel purchase options (4mm):Any seller works so long as the diameter is 4mm (nominal, actual is less).

https://www.aliexpress.com/item/32787318161.html?spm=a2g0o.detail.1000014.7.72142f448SJHbU&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.33416.213724.0&scm_id=1007.33416.213724.0&scm-url=1007.33416.213724.0&pvid=07cb0036-d70b-4afe-afaf-776f4b2f54b1&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.33416.213724.0,pvid:07cb0036-d70b-4afe-afaf-776f4b2f54b1,tpp_buckets:668%230%23131923%230_668%23888%233325%239_23416%230%23213724%230_23416%234721%2321967%23932_23416%234722%2321972%236_668%232846%238115%232000_668%235811%2327179%2336_668%232717%237562%23485_668%231000022185%231000066059%230_668%233422%2315392%23722_4452%230%23226710%230_4452%233474%2315675%23444_4452%234862%2324463%2324_4452%233098%239599%23487_4452%235108%2323442%23164_4452%233564%2316062%2336

https://www.aliexpress.com/item/32815310890.html?spm=a2g0o.detail.1000014.5.30818ddfxZHxb6&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.33416.213724.0&scm_id=1007.33416.213724.0&scm-url=1007.33416.213724.0&pvid=78f80d0b-5647-4eae-9683-00b6a1a0dba0&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.33416.213724.0,pvid:78f80d0b-5647-4eae-9683-00b6a1a0dba0,tpp_buckets:668%230%23131923%230_668%23888%233325%239_23416%230%23213724%230_23416%234721%2321967%23932_23416%234722%2321972%236_668%232846%238115%232000_668%235811%2327179%2336_668%232717%237562%23485_668%231000022185%231000066059%230_668%233422%2315392%23722_4452%230%23226710%230_4452%233474%2315675%23444_4452%234862%2324463%2324_4452%233098%239599%23487_4452%235108%2323442%23164_4452%233564%2316062%2336