Minimalist toilet paper roll holder 3D print model

A simple TP roll holder for sticking to walls or cabinets. Feel free to use double sided tape, silicone adhesive, or any other method for sticking two flat surfaces together. Simply wrap a rubber band around the notch in the end insert. I ended up putting superglue in the notch then wrapping the rubber band because mine ended up being too large, so I cut them. Superglue will hold most rubber bands really well!

Very easy to print, I used PLA 4 walls, 30% infill. Feel free to bump up the infill if you are not super confident with your layer adhesion settings.